TGM legend

From TetrisWiki
Revision as of 22:13, 11 May 2006 by 68.222.10.186 (talk)
Jump to navigation Jump to search

Standard and usual acronyms File:50%.png

Basic Terms File:25%.png

Appellation standards for Tetris games vary, especially with TGM. To avoid confusion, we list here the basic terms used most frequently when in context with the TGM series. All terms are not yet listed, and the order is still not fixed.

Block File:25%.png


A block is a single square grid cell. From this 1x1 cell makes components souch as tetrominoes, garbage, etc.


TetraminoFile:75%.png


In Japanese or even in general common usage, the word "block" can refer to both a tetromino or single grid cell. Another annoying fact, is that there is several syntax for the same word:

  • Tetramino (commonly used in Japan, less used in USA)
  • Tetromino (most frequent in math journals and scholarly resources)
  • Tetrimino (TTC term)

To avoid any confusion we will alway use the word "Tetramino" instead of "block," "piece," "tetra," etc. when in the context of TGM.

Four blocks arranged into a shape make the tetramino. There exists seven different tetraminos, each one with a specific color. TGM inherits its tetramino colors and rotation rules from Sega's 1988 arcade version of Tetris. But with the release of Ti and ACE, SRS has been added, which means different initial orientations and tetromino colors. It is also a common usage to refering to them by a single letter instead of color :

Initial orientation of I, L, J, S, Z, T and O Tetramino from the ARS.
Initial orientation of I, L, J, S, Z, T and O Tetramino from the SRS.









Tetrion File:25%.png


Sometimes called the "outfit Frame" or more simply the "box that surround the game". Certainly you have never heard about this word and you will never use it, but this is the official designation from TTC, and we only mention it for avoiding confusion between game part description and for example, the next definition.

TAP Easy
TAP Master
TAP Death
TAP TGM+
















Playfield File:25%.png


The playfield is surrounded by the tetrion. The standard size is fixed to a grid of ten blocks width and of twenty blocks height. In fact, the playfield's usable space is twenty-two blocks high. Two "vanished lines" are available on the upper part of the Tetrion. If you stack a Tetramino on these two lines, the blocks remaining will not be visible. They will become visible again with next cleared lines.

SRS Vanish zone example.

















Stack File:25%.png


Each time a tetramino is locked in the playfield, it becomes part of the stack. Building a perfect stack is the very essence of all Tetris game which means stacking each tetramino in a clean manner without making holes. Several other Tetris games pose stacking challenges, and TGM has its own, such as the '>' shape secret grade.

' > ' Secret grade.

















Garbage File:25%.png


Garbage is also part of the stack and is the consequence of your VS opponent's multiple cleared lines. Garbage appears from the bottom of the playfield and pushes up the current stack. Generally, grey filled lines with an empty hole (the hole position determination is actually unclear), the garbage lines count is directly dependant of the opponent cleared rows count.
Garbage also appears in Ti Shirase mode from level 500 to level 999 at regular intervals. The garbage lines, in this case, are generated by copying the bottom-most line.


Row File:25%.png


Filling a line without a hole will produce a row, also simply called "cleared line." Rows are always deleted before the next tetramino distribution. The stack above the cleared row drops down to the row equivalent. There exists four different row denominations :

  • Single : One row.
  • Double : Two rows.
  • Triple : Three rows.
  • Tetris : Four rows.

There is no explicit denomination when you clear more rows (eg. Big mode).


Tetris File:25%.png


Erasing four rows with the I tetramino rewards a Tetris.


Combo File:25%.png


Uninterrupted Rows sequence from a distributed tetramino continuation. Usually, a combo rewards more points, especially for rows which follow a Tetris (e.g. TGM1 & TAP).


Bravo File:25%.png


When you succeed to clear all playfield stack content after a row, leaving nothing. You are rewarded with a "Bravo" pop up screen (a.k.a. "All clear"). On TGM1 and TAP, you earn extra bonus points by multiplying current combo by four.


Frame File:25%.png


Before becoming a game, Tetris is basically a program. The frame is the shortest time indice in TGM. The game is running to a fixed value of 60 frames per seconds. A lot of Technical concept analysis use the frame as scale value instead of seconds.

Here is the basic of the gameplay process instruction order in ONE frame (draft) :

  1. Input read
  2. Gameplay process
    1. Rotation
    2. Shift (horizontal movement)
    3. Gravity
    4. Lock
  3. Output update
  4. Loop to one

In fact this is very complicated, but just be aware of this general concept, and particularly if you want to learn advanced technique in TGM.


Delayed Auto Shift (DAS) File:25%.png


Auto shift is vital for gameplay of all Tetris games and allows a player to shift a tetramino automatically by holding left or right. Also called "zoom," the DAS (counted in frame) define the moment between holding a direction (left/right) and the moment the tetramino moves automatically. The DAS can be loaded during ARE. In TGM1 the DAS was fixed to 15 frames, but in sequels the DAS become shorter as the game's speed increased.

...
...



















Gravity Unit (G)File:25%.png


G is the gravity speed indice of TGM, it shows [dropped steps / frame]. For example, the slowest speed count is sixty-four frames for one dropped step and the fastest speed is twenty dropped steps for one frame. TGM field's height is 20, so max is 20G.

1/64 = 0.0156G
1/1 = 1G
5/1 = 5G
20/1 = 20G
















Fast Drop File:25%.png


By holding the down direction, you can force the gravity to 1G, which means the active tetramino will step down faster. If gravity is higher than 1G, the fast drop is deactivated. In ARS, the Lock Delay cancel and Fast Drop use the same input, so if the tetramino lands on the stack during Fast Drop it will lock instantly, unlike SRS.

ARS example
SRS example



















Sonic Drop File:25%.png


Sonic drop is a feature specific to ARS and unavailable in TGM1. By pressing up, you can force the gravity to 20G during 1 frame. Visually you force the tetramino to land on the stack without locking (unlike sonic lock). Sonic drop allows you to place your tetramino in tight place very quickly and avoid the stacking error consequences of fast dropping. For beginners, sonic dropping with up may look strange, but interestingly allows the player to preform convenient Zangi-Moves.

Example
Zangi-moves !


















Sonic Lock File:25%.png


Sonic Lock is a feature specific to SRS. By pressing up, you force the tetramino to land onto the stack and lock immediately. At low gravity, Sonic Lock allows you to stack faster than Sonic Drop but doesn't make room for Zangi-Moves since the tetramino locks.

...


















Lock Delay File:25%.png


When the tetramino falls onto the stack, it doesn't lock immediately (e.g. tetris gameboy) because a short delay still allow you to move it. Lock Delay is visible to the darkening of the tetramino. This feature is necessary as speed increases and critical when reaching 20G. The delay is expressed in frames and the tetramino automatically locks when reaching zero. Lock delay resets each time the tetramino drops one or more steps. SRS also resets Lock Delay when the tetramino is moving and rotating. TGM1 Lock Delay is fixed to thirty frames (~0.5sec) and diminutive as gameplay speed increase on sequels. You can also cancel the Lock delay by pressing Down.

...
Delay reset
Delay cancel


















Initial Rotation System (IRS) File:25%.png


By holding a rotation button during ARE you can change the initial orientation appearance for the next tetramino. IRS mellow the gameplay as the gravity increase and reach 20G. You can only reorient the tetramino to 1 quarter turn, witch mean that it is not cumulative (eg A+C buttons), but IRS can be coupled with IHS.

...


















Initial Hold System (IHS)File:25%.png


By pushing the Hold button, you can switch the active tetramino with a held tetramino. The new held tetramino orientation resets, and the new active tetramino is replaced on the playfield's top. By holding the hold button during ARE, the switch occurs before the next tetramino appears. IHS mellows the gameplay as the gravity increases and reaches 20G. Holding becomes unavailable (grey color) until the next distributed tetramino, since otherwise you could switch indefinitely. IHS can be coupled with IRS and is a feature only available from TGM3 and TGM ACE.

Hold basics
IHS


















Temporary Landing System (TLS) File:25%.png


The TLS is a simple visual help that show at low gravity where the active tetramino will land if you use Fast Drop, Sonic Drop or Sonic Lock.

...


















Level File:25%.png


The level shows the game's progress. Starting from zero, the level increases by one each time a tetramino is distributed, and by the number of completed rows. If you are a beginner at TGM, the level is the best information to see your performances progress, rather than the chronometer.


Level Step File:25%.png


The Level increment can stop when reaching a Level Step (typically _99 : e.g. 99, 199, 299 etc...). You can pass only by completing a row. Each time you pass a Level Step, the game displays a new background. TGM3 also plays a bell ringing sound each time you are close to the Level Step.


Grade Recognition System (GRS) File:25%.png


ARIKA rewards a player's skill and performance by grade attribution and divides them into class. For example, here is the sorted grade list for the TGM1 unique game mode :

9, 8, 7, 6, 5, 4, 3, 2, 1, S1, S2, S3, S4, S5, S6, S7, S8, S9, Gm.

Becoming a Gm Class player in TGM1 will require much motivation and perseverance even if comfortable with Tetris games in general. The difficulty to obtain the Gm grade in TGM2 and TGM3 increases in a exponential way. For example, we know that there is an average of 10000 Gm class players in Japan on TGM1. It would be really optimistic to say 100 Gm players in TGM2 Master Mode exist, and so far nobody obtained it in TGM3!


Wall-Kick File:25%.png


The wall kick is simply a way to mellow the rotation system. When you want to turn a tetramino and there is no free space for the new requested orientation, the game will try to decal it to the nearest position possible. Depending on the version of TGM and the rotation system (ARS/SRS), the Wall Kick rules are different and less or more flexible.

(several animated gif example to come...)



Synchro File:25%.png


A Synchro move is the action to sucessfully input rotation and shift on the same frame. Although less useful in low gravity, but they become essential at 20G for enabling tricky tetramino movements and placements.


Arika Rotation System (ARS) File:25%.png


ARS definition.


Super Rotation System (SRS) File:25%.png


SRS definition.


Zangi-Moves File:25%.png


Zangi-Moves definition.


ARE File:75%.png

ARE is the period of time between the lockdown of the previous piece and the appearance of the next piece. Depending on the level, the amount of ARE may shorten.

During ARE

During ARE, the player must wait for the next piece to appear, and cannot actively cause anything to happen. However, ARE serves as a time for the player to input DAS, IRS and IHS actions which will be processed in the moment ARE finishes and the next piece appears.

Word Origin

ARE is a word of Japanese origin, and though it looks like an acronym, it does not stand for anything. It derives from the Japanese word, "あれ (are)," pronounced "a ray" quickly. The word "あれ" is a demonstrative pronoun, literally translating to "it" or "that". Japanese players originally referred to this in-between time using the word "あれ" as there was no good word to describe it. The capital letter alphabet form "ARE" (pronounced ay arr ee) became popular when someone wrote it in that form, possibly owing to its cooler, acronym-like look.

The Existence and Lack of ARE

ARE is a vital gameplay factor in TGM, as its existence allows for many systems like 20G, DAS, IRS and IHS to exist. It does not exist, like most other features unique to TGM, in most games Tetris-Worlds reminiscent games. It is debated whether the lack of ARE is a requirement in the World guidelines or not; TGM3 (Ti) and TGMA in particular, do have ARE even though they seem to follow the guideline.